Furnace Repair in Beverly Hills, CA
Need Furnace Repair in Beverly Hills? Call us at (818) 888-3968 when you need an honest and reliable Furnace Repair company in Beverly Hills, CA. Our repair technicians specialize in servicing all makes and models of heat pumps, wall heaters and Furnaces. We are available for 24 hour emergency Heater Repair service, offering routine Heater Tune ups to keep your furnace working as efficiently as possible throughout winter.
If you think your broken heater has a simple fix you can do yourself, read below. You may save some time and money.
Our licensed and experienced Heater Repair technicians are ready to fulfill all of your repair needs. Are you experiencing any of the following problems?
- Furnace vents blowing out lukewarm, cool, or even cold air.
- Your furnace is on, but your house is not reaching the temperature you set on your thermostat.
- Your furnace keeps starting and stopping and without heating up to the temperature
- Little or no airflow from air vents.
- Vents blowing out moist or humid air.
- Dust and debris blowing out of vents.
- Furnace and/or vents produce noise when running.
- Furnace isn’t turning on at all.
If you’re experiencing these problems, we can help. Call us now! If you want to avoid having your furnace repaired during the cold winter months you may want to call us to perform a maintenance check up in the early fall to ensure that everything is working order before the weather gets cold. Doing maintenance on your system can prevent major repairs from happening. When you schedule an appointment with us, you can trust that the technician who shows up your door will be licensed, experienced, and professional. We always show up on time you will know the cost with our upfront pricing so that you can be sure in making the best possible decision for you and your family.
What are some things i can try to get my heating system up and running again?
- Replace the air filter, if your furnace cycles on and off after a couple of minutes of it being on. Your furnace may be overheating due to lack of air going through your system.
- After replacing your filter turn your thermostat off for 10-15 minutes.
Try to turn it on again. - If the above did not work try a total reset of your furnace or roof top packaged unit by turning off the breaker and turning it back on.
- Make sure to wait 5 minutes to turn your system back on after flipping the breaker back on.
- Try to Replace the batteries in your thermostat. If you do not find batteries in your thermostat most likely your thermostat takes direct power from your furnace or rooftop unit.
If none of the above worked for you, do not worry. Just give us a call and one of our trained repair technicians will be happy to assist you in getting your heating system back up and running.
What Are Common Problems With a Furnace?
- Thermostat malfunction. An older thermostat can wear out or be damaged, which limits your control of the heating system, say you set your thermostat to 72 degrees some older worn out thermostats can go over your set temperature or below sometimes by up to 5 degrees+/-. Upgrading to a programmable thermostat will solve this problem and also enable you to cut heating costs.
- Mechanical problems. The blower motor or bearings in a typical furnace are all wear and tear items. When these parts become worn, they must be replaced to avoid air flow problems or total system shutdown.
- Ignition problems. Most of today’s furnaces have electronic ignition, so that the burner only turns on when the thermostat calls for heat. A clogged burner nozzle or a faulty ignition will prevent the burner from working correctly.
- Cracked heat exchanger. This furnace component separates the combustion process from the indoor air supply. With age, a heat exchanger can crack, which causes safety and performance problems.
- Improper venting. Any furnace that burns fuel be it gas or propane requires an air supply for the combustion process, and a venting system to expel combustion gases. Your furnace technician will check for proper ventilation during regular service calls.
- Outdated, inefficient performance. Today’s high-efficiency, sealed combustion furnaces can operate at 90% efficiency or better. Older furnaces may only reach 75% or 80% efficiency, even in perfect conditions. Upgrading to an efficient, ENERGY STAR® furnace is a smart option in many cases.
- Leaky, uninsulated ductwork. Although ducts aren’t part of the furnace, their condition has a huge impact on overall heating of your home or business. By sealing and insulating the ductwork system, you can improve system efficiency by 15-20% or more.
The furnace is typically divided into three primary components:
Our Heater Repair Services
When winter settles in Beverly Hills, nights can get really cold! Our Heater Repair experts can offer reliable and cost effective heating solutions, whether you need a new central heater installed or having your heater repaired, we take pride in offering each client a customized solution. Not every central heating system is the same.
At Pacific Coast, we can do more than fix your broken furnace or heater. Our skilled Repair technicians are also highly qualified and trained to offer you the following:
- Regular maintenance of your furnace / Heating system, including checking and replacement of all filters.
- Installation of a new furnace system when the old one can’t be repaired or is no longer efficient.
- Inspection of your current system to determine what repairs or replacements are necessary.
- Advice regarding how to increase the energy efficiency of your home or office building, and professional opinions on which products can help lower your utility bills.
- Information on how to improve the safety of your heating system and lessen your risks of accidents when working with your furnace or heater.
Why We Are Different
When your Heater stops working, we know you have your choice of companies that provide heater repair in Beverly Hills, CA. We’ve worked hard over the years to develop a system that sets us apart from the rest and we offer you the best products and services around:
- Our Heater Repair technicians are guaranteed to always be on time. We know your time is valuable which is why we aim to show up at the early part of your appointment time window.
- Each of our technicians drives a vehicle that is fully stocked to complete most repairs during the first stop, minimizing your inconvenience and ensuring that your heater is up and running quickly.
- Guaranteed service within 24 hours of the time you speak to one of our friendly representatives.
- Our certified technicians are always professional and treat you with respect.
- Affordable services that don’t sacrifice quality.
- Emergency services 24 hours a day.
- Special discounts and monthly deals for valued customers.
- Each technician provides you with a detailed explanation of any services that are performed and any charge you are asked to pay.
Sometimes, the major cause of delay for furnace repair is a technician that arrives without the right tools and parts. You will never experience such delays with our company!
Our technicians will go to your home with all the necessary equipment so that nothing gets in the way of your timely, efficient repair or replacement service. Our vehicles are warehouses on wheels, we stock all the right parts to save you time and money.
Air Duct Repair and Replacement
How Do I Know My Ducts Need to be Serviced?
If you have noticed your air has been sub-par lately, and feels stagnant or stale, it may be time to have your ducts replaced. Ducts that have not been properly maintained lead to stuffy environments, and generally provide you with temperatures that are either too hot or too cold.
Air duct repairs are needed from time to time from natural wear and tear of daily use. Our friendly team members conduct visual inspections as well duct system sealing tests to find the problem or problems. Once the issue has been discovered, appropriate repairs to the air ducts are recommended. We take pride in our work; air ducts are thoroughly inspected and meticulously repaired to ensure your heating system is once again running at top quality, without wasting energy or increasing your utility bill.
Duct replacement is usually needed for those looking to upgrade their heating system, or if the need arises due to the old or asbestos ducts being poorly installed or damaged. With Pacific Coast Heating and Air inc, duct replacement is conducted by an experienced expert. The new air ducts will be properly installed for ultimate efficiency. Our professionals utilize state of the art equipment and tools along with premium ductwork products to give our clients the best duct replacement service with the least amount of air leaks.
Thermostat Installation
Your thermostat is by far the single part of your heating equipment with which you have the most direct interaction. It is with your thermostat that you control your heating and cooling system, adjusting temperatures as desired. It is also your thermostat which you rely to regulate the performance of your system, cycling that equipment on and off in order to maintain the temperature that you’ve set in your home. In order to succeed in doing so, you must use the thermostat most suited to your needs in your home.
Not only must you choose your thermostat carefully so that you can use it with the convenience and satisfaction that you deserve, but you must also know that the component itself is doing its part. That is why you must hire a professional to install and test your thermostat. Only then can you be sure that your thermostat is functioning precisely as it ought to and that its calibration is correct.
Different Types of Thermostats:
- Wireless Thermostats
- Smart Thermostats (Wi-Fi Enabled)
- Digital Thermostats
Wi-Fi programmability means that you can control the comfort of your home from virtually anywhere as long as you have signal on your phone device and your home internet is up and running. With the smart thermostat controls in the palm of your hand, you’ll stay comfortably connected—no matter where the day takes you. That’s the future of comfort. That’s the future of control.
A few perks of going with a Smart Wi-Fi Thermostat:
- Adjust heating or cooling temperatures from your smartphone before arriving home.
- Receive high- and low-limit temperature alerts via text and email. If your heating and cooling system does not maintain the desired temperature settings.
- Adjust heating and cooling temperatures remotely. While on vacation or for a rental home as the seasons change.
- View system-generated usage charts so you can make temperature/schedule adjustments to manage energy consumption.
Furnace Installation and Replacement Beverly Hills
Not every furnace can be repaired. There are times when an older furnace is beyond repair or may simply cost more to repair than to replace. In such cases, your technician may recommend that you have your furnace replaced. Sometimes a new furnace is the most cost-effective and energy-efficient way to go. We will always be honest with you about a possible furnace replacement. We value our time and your money––we don’t want to perform repairs or service on a furnace that is in need of replacement.
Your technician can discuss with you your heating needs and recommend a new furnace that can best meet your home requirements and your budget. Most residents in Beverly Hills look for ” The best furnace” to be installed in their home. Instead of focusing more on which company to use to install their new heater. A big number of repairs needed within the first few years of a furnace installation are due to poor installation.
Common reasons for furnace replacement include:
- Increasing Furnace repair costs: Old furnaces are fixable, in some cases universal parts can be used in other original manufacturer parts are needed which is to be very costly.
- Lack of reliability: You find yourself repairing it once or twice a year
- Complete system failure: Your heater has completely failed or has a broken firebox due to age or improper air flow from when it was first installed.
- Rising energy bills: If you’re paying more for heating than you typically would in similar weather, your gas furnace’s efficiency is dropping.
- Uneven heating: Are certain rooms or areas of the house colder than others? These cold spots indicate uneven heating performance.
- Frequent cycling: Ideally, your furnace won’t need to cycle on and off often to maintain comfortable temperatures. If you notice significant cycling, you’ll want to heed this warning sign.
- Issues with air quality: Toward the end of its lifespan, your gas furnace may not be able to prevent humidity problems, excessive dust, and rust particles from entering the air inside your home.
If you do need a furnace replacement, we know how overwhelming it can be. Here are some of the frequently asked questions about furnaces that we get from some of our local residents:
What Are The Different Types Of Furnaces?
Single Stage: A single-stage furnace has only one stage of operation. It can either be turned on or turned off.
Two Stage: A two-stage furnace has two settings––full and half speed. This is a more efficient way to heat and provides for better comfort, because it can move the air at a slower pace.
Variable Stage or Modulating: A variable-stage or modulating furnace modulates the speed and heat output based on the temperature outside and the desired comfort level. This furnace only works as much as you need it, making this type the most energy-efficient type of furnace.
While a new gas furnace requires an up-front investment, you’ll find many perks when choosing a new heater. Regardless of why you’re considering a furnace change out, our goal isn’t to make as much money off of you as possible, but to provide you with a level of professional service that will make you a customer for life and in hope you will refer us to friends and family which is how we have grown our business for over 20 years. If you know that your heater needs to be replaced, or you need an experienced technician’s opinion as to whether repair or replacement is the best choice for you, call us we can help you.
At Pacific Coast we focus on designing our Furnace installations so that they will perform as quiet as possible and provide lasting results. We also take the necessary steps to inform our customers about the high efficiency systems that are available on the market today to meet their needs, to prevent future Furnace Repair we work with only the best brands. Our Furnace installation comfort specialists focus on energy efficiency, which means when it is time for a new Furnace we will help you find a system that uses the least amount of energy by ensuring the system is designed for your home to help lower your impact on the environment and on your utility bills. Want to know why your neighbors and friends use our company call us for a free Furnace installation quote in Beverly Hills. If you suspect that your heating system may be beyond repair, consider purchasing a new unit from us. We’re happy to help you select the right one. Give us a call at (818) 888-3968 to request a quote or discuss a new central heating unit!
CALL US AT: (818) 888-3968